SKS-GⅡ

Indexable tool for high feed machining

“SKS-GⅡ” SKG / MSG type,
innovative high feed cutter
achieved extremely excellent
chip removal rate

The lineup includes 10 and 14 types of square positive inserts
with 4 corners on one side.
Highly efficient and high depth of cut machining is possible.
Perfect for pcket milling of mold materials.

Check and Download PDF files

Download DXF・STEP files

If you would like to download multiple catalogs,
you can do so from the list page below.

List of files

Line-up

※左右にフリックしてご覧いただけます。

Cat. No.	Type	Tool Diameter （ΦDc）
SKG-10	Facemill type (10 type)	Φ50～Φ80
SKG-14	Facemill type (14 type)	Φ50～Φ160
MSG	Modular head type（10 type）	Φ25～Φ42

Features of products

One-side positive insert
with high depth of cut and
high feed machining

Axial rake angle of main body is strengthened,
and the insert is a positive insert with excellent
sharpness. 14 type is possible high feed
machining with a high cutting depth of ap: max.
2.5 mm.

Large chip pocket achieved
excellent chip removal

Large chip pockets are designed to improve
chip evacuation during high-feed machining.
It prevents problems such as biting chips
during machining.

Wide range of inserts for
a wide range of work materials

3 coating grades, such as JC8118, JC8050, and
JC7550, can be applied to a wide range of
materials from general steel to prehardened steel and
high hardened materials.In addition, new
DS150 coating is for difficult-to-cut materials such as
titanium alloys.