SKS EXTREME 09type
Line-up
| Cat. No. | Type | Tool Diameter （ΦDc） |
|---|---|---|
| EXSKS | Facemill type | Φ50～Φ160 |
Feature of products
High rigidity specification
for high depth of cut
and high feed machining
The thick, highly rigid inserts (6 corners on double sides)
and the highly rigid G-Body body are
firmly clamped together in a wedge-shape.
It also excels in ramping and pocket milling,
and enables high feed machining
with L/D=6 or more.
”PM insert”
for extreme high cutting depth
on Max.ap=3mm
Suitable for face milling of ap=1.4mm
or more and shape machining
such as pocket machining.
"PL insert"
for stable pocket milling
on Max.ap=2mm.
Suitable for machining shapes
such as pocket milling
with ap = 0.6 mm to ap = 1.2 mm.
The composite shape of the straight
and radius cutting edges reduces fluctuations
in cutting resistance during corner machining,
realizing stable machining and extending tool life.
FAQ about Indexable tool for high feed machining
What is the difference between PM insert and a PL insert?
The PM type is used for high depth of cut with a maximum depth of cut of up to 3 mm.
It is the first recommended for flat surface machining or when you want to increase the amount of chip evacuation.
The PL type has a maximum ap of 2 mm,
but is perfect for machining with a long overhang length, pocket machining, and machining materials with about 40 HRC.
